Replacing your bumper guard grommet set can be pretty simple. First you have to remove the old bumper set. It would be very beneficial to you if you have a stringers awl and a pair of needle nose pliers to help remove the old grommets. You will also need these tools when installing the new bumper guard and grommet set. The awl is very beneficial to get some of the grommets through the holes, especially around the bends in the frame. You may also need a heat gun to heat the bumper guard so you can stretch it a little. This is very common with Babolat and also Dunlop racquets. Following these tips will make your life easier when replacing a grommet. This process depending on racquet brand should only take about 10 minutes. If you have any questions, please call us for us to walk you through the process.

Below is a selection of grommets for your brand racquets Please select the bumper and grommet set from the drop-down menu below. If you do not see the bumper and grommet set you need, select:
(SPECIAL ORDER-NOT ON LIST) from the bottom of the list.
Please use the
"Comments" field (at Checkout) to specify:

Manufacturer,

Model,

Head Size,

Racquet Length (as applicable).

for this special order bumper and grommet set to ensure that you receive the correct bumper guard/grommet sets.

Tell a Friend about this product