CP-761 is an acrylic polymer emulsion that offers an alternative method to the Novabond slurry method of surfacing bare concrete.

When used over clean concrete, CP-761 will improve bond of acrylic coatings to concrete.

Allow CP-761 to dry completely before next application of Novacrylic surface system.

NEW CONCRETE MUST:

• Have vapor barrier under the slab.
• Have medium broom finish.
• Contain no curing agents.
• Cured for 30 days.
• Be etched with phosphoric acid wash.
• Be prepared as instructed on Preparation Concrete page.

DILUTION: 2 parts CP-761 and 1 part water.

SPREADING RATE: 0.05 - .057 gallons per sq. yd., per coat, 160 - 180 sq. ft. per gallon, per coat.

COLOR: Milky white liquid / clear when dry.

PACKAGED QUANTITY: 5 gallon pail.

(Call or email for COST OF 30 AND/OR 55 GALLON CONTAINER.)

WEIGHT: 45 lbs per 5 gallons.

Minimum Application Temperature is 50F and rising.

Application is with either roller, Neoprene rubber squeegee, or spray

For application instructions please visit www.novasports.com or call 1800 USA NOVA

CP-761 is not hazardous and is free of lead, mercury, asbestos and formaldehyde.

All returns subject to 15% restocking fee.

PLEASE READ: IMPORTANT SHIPPING INFORMATION
** The shipping charge for this item is $29.95

Not available for in store pickup.